PassPrep

如何 Parallel Park

Backing your vehicle into a parking space between two cars along the curb.

分步操作

  1. Find a space at least 3 feet longer than your vehicle. Signal, check your mirrors and blind spot, and slow to a stop.
  2. Pull up alongside the car in front of the space, leaving about 2 feet between the two vehicles, with your rear bumpers roughly even.
  3. Shift into reverse. Check over both shoulders and out the rear window, then back up slowly while turning the steering wheel fully toward the curb.
  4. When your car is at about a 45-degree angle and your front seat is even with the rear bumper of the car ahead, straighten the wheels and keep backing slowly.
  5. As your front bumper clears the rear of the car in front, turn the steering wheel fully away from the curb to swing the front of your car in.
  6. Straighten the wheels, center the car in the space, and finish within 18 inches of the curb without touching it.
  7. Set the parking brake and shift to park (leave a manual transmission in gear).

考官看什么

That you check mirrors and blind spots, control your speed, end up within about 18 inches of the curb without hitting the curb or the other cars, and finish parallel and centered in the space.

常见失分

Ending too far from the curb, hitting the curb or another vehicle, skipping the blind-spot check, turning the wheel too early or too late, and backing up too fast.

什么时候会用到

Parallel parking is a standard part of many state road tests and is common when parking on city streets.

相关动作

依据各州 DMV 驾照手册与官方路考评分标准。具体要求各州略有不同——请以你所在州的驾照手册为准。