PassPrep
Language EN
All ExamsNorth Carolina Driver LicenseSharing the Road

Sharing the Road — North Carolina Driver License Practice Test

Sharing the RoadQuestion 1 of 30

33 questions in this topic · 30 drawn at random this round

Since July 2015, what must all moped operators do with their vehicle?

NC Driver's Handbook

All questions are based on the official North Carolina Driver's Handbook (NCDMV). Study the relevant chapter to reinforce your knowledge.

Open Handbook Section ↗

Session Progress

Answered0 / 30
Correct0
Accuracy—

This North Carolina Driver License Sharing the Road practice set has 33 practice questions based on the official exam materials, each with an instant explanation. You need 80% on the real North Carolina Driver License knowledge test to pass.

Topic overview

This chapter explains how drivers share North Carolina's roads safely with bicyclists, pedestrians, large trucks, recreational vehicles, motorcycles, and moped riders — each group has different visibility, stopping distance, and maneuvering needs that a driver must anticipate. It also covers roadside courtesy topics like litter laws and the Adopt-A-Highway program.

The most heavily tested concepts are the "no-zones" around large trucks (blind spots where a car can disappear from the truck driver's view — in front, alongside the cab, and behind), the rule that bicycles are legally vehicles entitled to a full lane, and the passing rules for motorcycles and mopeds (change lanes to pass a motorcycle; leave at least two feet when passing a moped).

A common mistake is assuming a small vehicle like a motorcycle or moped is farther away or slower than it appears — their narrow profile makes them easy to misjudge and easy to lose in a blind spot. Another frequent error is forgetting that mopeds are legally capped at 30 mph and require a valid driver license or ID plus registration, unlike a bicycle.

What are truck "no-zones" and why do they matter to a driver?

No-zones are the large blind spots around a tractor-trailer — roughly 20 feet in front of the cab, along both sides near the cab, and up to 200 feet behind — where the truck driver simply cannot see a car; lingering there hides you from a driver who may need to react to traffic ahead, so a useful rule of thumb is: if you can't see the truck driver's face in their side mirror, they can't see you either.

How should a driver pass a bicyclist versus a moped?

Because bicycles are legally vehicles entitled to the full width of their lane, a driver should change lanes entirely to pass a bicyclist when there's abundant clearance and no oncoming traffic; for a moped, which typically rides on the right side of its lane, the driver must stay at least two feet to the left when passing rather than fully changing lanes.

Why can visibility be a bigger problem with motorcycles and mopeds than with cars?

Their narrow profile is easy for a driver's eyes to skip over or lose in a blind spot, especially at intersections, when changing lanes, or in left-turn situations, so drivers must deliberately look for them rather than assuming the road is clear.

Written from the official North Carolina Driver's Handbook — Sharing the Road ↗· Last checked: 2026-07-10· Reviewed by the PassPrep editorial team· How we verify →

Sample questions

Three questions from the Sharing the Road bank with the correct answer and an explanation. The practice quiz above draws 30 questions at random from the same bank.

  1. Because bicycles are considered vehicles in North Carolina, what must bicyclists do?

    • Obey the same traffic laws as other drivers, including DWI laws — Correct answer
    • Follow only pedestrian rules since bikes are not motorized
    • Ride exclusively on sidewalks at all times
    • Ignore traffic signals because they apply only to cars

    Explanation: Bicycles are vehicles, so bicyclists must obey the same traffic laws as other drivers, including DWI laws.

    Handbook: Sharing the Road — Bicycles as Vehicles

  2. Where can bicyclists be expected to ride in North Carolina?

    • On all roads except where they are expressly prohibited — Correct answer
    • Only on roads with a marked bicycle lane
    • Only on rural roads, never in cities
    • Only on the sidewalk next to the road

    Explanation: Bicyclists may use bike lanes, paved shoulders, or all-purpose travel lanes, so they can be expected on all roads except where expressly prohibited.

    Handbook: Sharing the Road — Where Bicyclists Ride

  3. Like drivers, what are bicyclists required to do?

    • Ride on the right, stop for stop signs and red lights, and give hand signals — Correct answer
    • Ride against traffic so they can see oncoming cars
    • Proceed through red lights when no cars are present
    • Ride only on the left edge of the lane

    Explanation: Bicyclists must ride on the right, stop for stop signs and red lights, and give hand signals, just as drivers must obey those rules.

    Handbook: Sharing the Road — Bicyclist Rules of the Road